Buzzers are a great safeguard to add on any drone. This small investment can save you hundreds of dollars. The super loud alarm will alert you to where you lost your quad.
The VIFLY Finder V2 adds additional features beyond just a simple buzzer when it detects a crash. Want a wireless buzzer solution? Check out the VIFLY Beacon.
Advanced ViSense Technology
With ViSense-based technology, the VIFLY Finder 2 can power itself to beep even the quad battery has been ejected. Even more, the built-in light sensor can detect light intensity and then smartly control the LED light to flash. Besides, it enables the buzzer to automatically enter into sleep mode at night to save power and not disturb.
Much Louder than Standard Buzzer
To easily find the lost drone in long-distance, the VIFLY Finder 2 buzzer is designed to install a very loud beeper that the DB is over 100.
Two Options to Disarm the Buzzer
- Disarm with button: Disconnect the main battery, hold the disarm button on VIFLY Finder 2 for 1-5 seconds then release.
- Disarm with main battery: Disconnect the main battery, then connect the main battery for 3-6 seconds and disconnect it again.
It will beep 3 times when disarmed successfully.
Compatible with Both FPV quadcopter and RC Airplane
VIFLY finder 2 is programmed to be compatible with any flight controllers to support FPV quad and receivers for RC airplanes. No extra setting required it will automatically recognize the device to connect.
- Volume: Up to 105 dB
- Working Time: Up to 30 hours
- Charge Time: 1.5 hours
- Battery: 80mAh LiPo
- Input Voltage:4.5-8.5V
- Dimensions: 24x13x16 mm
- Weight: 5 g
|First 30 seconds||30s to 2 hours||After 2 hours|
|Low volume||Max volume every 6s||every 12s / idle until dawn|