Lýsing
The Diatone Mamba F722 MK3 Basic Stack brings BIG power all in a 20×20 mounting size! This stack can push 40A all while bringing you the latest features!
Features
- Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference
- The standard flight controller (30.5×30.5) adds a spare pad
- Self-recovery insurance to the receiver’s 5V power supply
- LED signal selection (when Mamba Led sys avaiable）
- Increased camera VCC power supply pad
- TVS instant high voltage protection 30V
- BEC short circuit protection
- Super Big Soldering Pad
- Increased pad area
Updates
- When you connect the USB, the receiver and OSD settings can be saved
- The pad area of the Mini flight controller (20×20) increased by 140%
- Upgraded anti-interference cable
- Added I2C function
- Use TypeC
Specifications
MAMBA Basic F722 MK3 MINI FC
- BEC: 3.3V 0.5A& 5V 3A (System Power)& 5V 3A(LED)& 9V 3A
- LED Controller: BF LED/MB LE（4 Set 2812 LED）
- MCU: 216MHz STM32F722RET6
- Input: 3~6S Lipo (12.6~25.2V)
- Blackbox: 16M Flash Memory
- MOUNTING: 20mm, M3
- ESC Soft: Dshot300/600
- ESC Telemetry: Yes
- TVS Protection: Yes
- GYRO: MPU6000
- Power Led: Yes
- Barometer: Yes
- S/F.Port: Yes
- Uarts: 6Set
- OSD: Yes
- RSSI: Yes
- Buzz: Yes
MAMBA F40 128K MINI ESC
- Target：BLHeli_32 MAMBA F40_128K_MINI
- INPUT VOLTAGE: 2~6S Lipo (8.4V~25.2V)
- CONTINUE CURRENT: 40A×4
- BURST CURRENT: 45A (10S)
- MOUNTING: 20mm,M3/M2
- SOFT: Dshot300/600/1200
- TVS Protection: Yes
- BEC: No
Includes
- 1x Diatone Mamba Basic Stack F722 MK3 FC + F40 40A 128K ESC
- 1x AMASS Original XT60
- 2x 16AWG 60mm Cable
- 1x 470uF/35V Capacitor
- 60x Hard Dampers
- 40x Soft Dampers
- 1x Hardware Kit
- 2x 8pin sh1.0
