Útsala!

Diatone Mamba Basic Stack – F722 MK3 FC + F55 55A 128K ESC

16.134 kr.

The Diatone Mamba F722 MK3 Basic Stack brings BIG power all in a 30.5 x 30.5 mounting size! This stack can push 55A all while bringing you the latest features!

Ekki til á lager

Vörunúmer: 6378 Flokkur:

Lýsing

The Diatone Mamba F722 MK3 Basic Stack brings BIG power all in a 30.5 x 30.5 mounting size! This stack can push 55A all while bringing you the latest features!

Note: This is the No WiFi version.

 

Features

  • Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference
  • The standard flight controller (30.5×30.5) adds a spare pad
  • Self-recovery insurance to the receiver’s 5V power supply
  • LED signal selection (when Mamba Led sys avaiable)
  • Increased camera VCC power supply pad
  • TVS instant high voltage protection 30V
  • BEC short circuit protection
  • Super Big Soldering Pad
  • Increased pad area

Updates

  • When you connect the USB, the receiver and OSD settings can be saved
  • Upgraded anti-interference cable
  • Added I2C function
  • USB Type-C

 

 

Specifications

MAMBA Basic F722 MK3 FC

  • BEC: 3.3V 0.5A& 5V 3A (System Power)& 5V 3A(LED)& 9V 3A
  • LED Controller: BF LED/MB LE(4 Set 2812 LED)
  • MCU: 216MHz STM32F722RET6
  • Input: 3~6S Lipo (12.6~25.2V)
  • Blackbox: 16M Flash Memory
  • MOUNTING: 30.5mm, M3
  • ESC Soft: Dshot300/600
  • ESC Telemetry: Yes
  • TVS Protection: Yes
  • GYRO: MPU6000
  • Power Led: Yes
  • Barometer: Yes
  • S/F.Port: Yes
  • Uarts: 6Set
  • OSD: Yes
  • RSSI: Yes
  • Buzz: Yes

MAMBA F55 128K ESC

  • INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
  • Target:BLHeli_32 MAMBA F55_128K
  • MOUNTING: 30.5×30.5mm ,M3/M2
  • CONTINUE CURRENT: 55A×4
  • BURST CURRENT: 60A (10S)
  • SOFT: Dshot300/600/1200
  • TVS Protection: Yes
  • BEC: No

Includes

  • 1x Diatone Mamba Basic Stack – F722 MK3 FC + F55 55A 128K ESC
  • 1x AMASS Original XT60
  • 2x 12AWG 100mm Cable
  • 1x 470uF/35V Capacitor
  • 60x Hard Dampers
  • 40x Soft Dampers
  • 1x Hardware Kit
  • 2x 8pin sh1.0